…m a graph + sweepNo

- Added SFH_GetLabNoteBooksForSweep to retrieve LNB only
- Added SFH_GetLabNoteBooksAndDFForSweep to retrieve LNB and SweepDFR

These functions abstract the differences between a graph that is a DB and a SB.
For an SB graph a valid mapIndex must be given as argument.

preparation commit for the following changes

problem described in #2151

SF requires to retrieve the correct LNBs and sweepDFR for sweeps.
Through the analysisbrowser sweeps from multiple devices and/or
experiments can be loaded. This must be handled correctly or wrong
data is retrieved/analysed.

Thus, SF functions that retrieve sweep data are adapted to handle that
correctly. For selections a forth column was added to store the mapIndex
of the sweepMap that is unique for a sweepNo, experiment, device combination.

For graphs from SB the mapIndex is used to retrieve the correct LNB, SweepDF.

** THIS BUGFIX IS LIMITED TO SWEEP HANDLING IN SWEEPFORMULA **

Other parts of MIES may be still unaware of multiple experiment/devices in the SB.

- allows to select device and experiment
- only one of these opeations are allowed for select and they must each
yield a single result, but allow wildcards
- the remaining behavior is like selrange where the information is taken from
the outermost select only.

- Add sweepMapIndex to trace user data in CreateTiledChannelGraph
- Rewrite of selection gathering and adaptations to sweep getting to be
aware of different experiment that require to work with sweepmap indices
instead of sweep numbers.
- adaptations of all SF functions that retrieve LNB and sweepDFR to be aware
  of multiple experiments present in a sweeepbrowser that could be selected
  by select

- remove now unused and obsolete BSP_GetSweepDF function

selexpandsci: Extends the selected sweeps with all sweeps from the same
stimset cycle id

selexpandrac: Extends the selected sweeps with all sweeps from the same
repeated acquisition cycle

The operations take no arguments. The feature is enabled if they are
added to select(....)

if both are used then first SCI and then RAC is applied.

- both operations take exactly one numerical argument
that sepcifies a specific setCycleCount and/or setSweepCount

- if not used in select then the filter is ignored

both operation take exactly one numeric argument specifying the index

selRACIndex selects all selections that have a specific index within a
repeated acquisition cycle

selSCIIndex selects all selections that have a specific index within a
stimset cycle

For some cases select was returning a zero sized wave for no results.
This was unified to be a null wave and the select argument parsing was
adapted to distinguish between regular filters from sel* operations and
select arguments

- selsweeps can return a null wave that was used as default value for the
  select filter. This clash was resolved by adding a seperate flag to
  indicate if select got any sweep numbers as argument.
  The checks for the default were changed to check against the new flag
  instead.
  The flag approach also keeps the check against specifying selsweeps
  multiple time intact.

- for seldev, selexp, selsetcyclecount, selsetsweepcount, selsciindex,
  selracindex, selexpandsci, selexpandrac

… usage

In principle the sweep browser supports multiple devices/experiments.
However not all sweep browser functions imlement a suitable API for that.
SB_GetSweepIndexFromMap is such function. When running tests it asserts now
if sweep numbers appear more than once, which can happen when multiple
experiments are loaded and this function is called.

- selsetcyclecount, selsetsweepcount, selsciindex, selracindex
- selexpandsci, selexpandrac

- sometimes PS_PB6 acquires sweep 2 as full sweep if the computer is slow.
However the test checked if there are no results.

If there was a full sweep acquired it tests now against existing results.

- LNB is handed down from SF_GetSelectData
- For the displayed case the LNBs are gathered per trace with TUD data from
  CreateTiledChannelGraph

- LNB handed down from SF_GetSelectData
- Uses correct LNB now for SB case

…tilities_Logbook.ipf

- use GetHeadStageForChannel to retrieve headstage
- Add function documentation
- adapt call sites

This avoids having invalid data in there.

Missed in the initial implementation in abe808f (SF: Add select
operation to select sweeps for data, adapted data operation, 2022-02-04).

In the same spirit as d5b560f (Bugfix: SF use proper handling of
sweepMap for SB, 2024-10-04) but for PSX.

We also need to include now the experiment name in the combo key to make
it unique. And for the stats equivalence data we also include the
sweepmapindex next to the sweepNo.